KW-Aufzugstechnik



KW Aufzugstechnik GmbH

KW KW KW

Version:

KW-Aufzugstechnik v2.1.0

You are here: Products » Complete Systems

Complete systems with electrical equipment bay

MR Control Rope-frequency - Control Cabinet KW 04M
 

Coloured control cabinet KW04M: 1200 x 550 x 300mm (H x W x D). Control cabinet mounting plate and the contactor plate are mounted for protection against oscillation. Control cabinet door with interchangeable door on the ground attack and integrated air filter box with thermostatically controlled fan. All operating units of external and internal use.

Power unit with frequency inverter in the top of the control cabinet mounted. Frequency inverter with a nominal current to 62A amps are integrated in the controler cabinet. At nominal currents up to 152A, we use the KW06 control cabinet or external arrangement. The shielded motor- and brakechopper wires are already connected (EMC Class B (N)).

In the bottom part of the cabinet is the information section arranged. The central controler DAVID-606 communicates serial (RS-485) with the car controler and the remote stations in the floors. All shaft- and terminal boxes, and the communikation bus, landing- and car panels are pluggable. The lower port area has a height of 200mm and is equipped with punched holes for hose clamps.

Optional there is a cabinet pedestal is available.

MR Control Hydraulic-Softstart Unit - Control Cabinet KW 04M
 

Coloured control cabinet KW04M: 1200 x 550 x 300mm (H x W x D). Control cabinet mounting plate and the contactor plate are mounted for protection against oscillation. Control cabinet door with interchangeable door on the ground attack and integrated air filter box. All operating units of external and internal use.

Power section with soft start unit in the top of the control cabinet ordered up to a nominal current of 80A. At nominal currents up to 200A, we use the KW06 control cabinet. The motor- and valve wires are already connected (EMC Class B (N)).

In the bottom part of the cabinet is the information section arranged. The central controler DAVID-606 communicates serial (RS-485) with the car controler and the remote stations in the floors.

All shaft- and terminal boxes, and the communikation bus, landing- and car panels are pluggable. The lower port area has a height of 200mm and is equipped with punched holes for hose clamps.

Optional there is a cabinet pedestal is available.

MR Control Hydraulic-Softstart Unit - Control Mounting plate KW 01 for Machine Cabinets
 

Control cabinet mounting plate KW01: 714 x 714 x 20mm (H x W x D) for machine cabintes of the companies ALGI, BUCHER and GMV/ Oildynamic. The contactor plate is mounted for protection against oscillation. Optimal location of control devices on the outstanding panel.

Power section with soft start unit on the left side of the control mounting plate ordered up to a nominal current of 63A. At nominal currents up to 125A, we use Control cabinet mounting plate B350. The motor- and valve wires are already connected (EMC Class B (N)).

At the right side of the cabinet is the information section arranged. The central controler DAVID-606 / 613 communicates serial (RS-485) with the car controler and the remote stations in the floors.

All shaft- and terminal boxes, and the communikation bus, landing- and car panels are pluggable. The lower port area has a height of 200mm and is equipped with punched holes for hose clamps.

MR(L) Control Hydraulic-Softstart Unit - Control Mounting plate KW B350 for ALGI/ BUCHER

Control cabinet mounting plate KWB350: 1050 x 700 x 20mm (H x W x D) for machine cabintes of the companies ALGI, BUCHER. The contactor plate is mounted for protection against oscillation. Optimal location of control devices on the outstanding panel.

Power section with soft start unit or frequency inverter on the left side of the control mounting plate ordered up to a nominal current of 125A. The motor- and valve wires are already connected (EMC Class B (N)).

At the right side of the cabinet is the information section arranged. The central controler DAVID-606 / 613 communicates serial (RS-485) with the car controler and the remote stations in the floors.

All shaft- and terminal boxes, and the communikation bus, landing- and car panels are pluggable. The lower port area has a height of 200mm and is equipped with punched holes for hose clamps.

MR Control Rope-frequency / Hydraulic - Controler Cabinet KW 06
 

Coloured control cabinet KW06: 1200 x 1000 x 350mm (H x W x D) at IP54. Control cabinet mounting plate and the contactor plate are mounted for protection against oscillation. Control cabinet with integrated air filter box with thermostatically controlled fan. Optionally there is a air codition system available.

All operating units of the outer cusp, or in the external sub-distributors operating box. Power unit with frequency inverter on the left side of the control cabinet mounted. Frequency inverter with a nominal current to 152A amps are integrated in the controler cabinet. The shielded motor- and brakechopper wires are already connected (EMC Class B (N)).

At the right side of the cabinet is the information section arranged. The central controler DAVID-606 communicates serial (RS-485) with the car controler and the remote stations in the floors.

All shaft- and terminal boxes, and the communikation bus, landing- and car panels are pluggable. The lower port area has a height of 250mm and is equipped with punched holes for hose clamps. By default, a control cabinet pedestal at a height of 500mm is provided.

MR Control Rope-frequency / Hydraulic - Controler Cabinet KW 07
 

Coloured control cabinet KW07: 1800 x 600 x 400mm (H x W x D) at IP54. Control cabinet mounting plate and the contactor plate are mounted for protection against oscillation. Control cabinet with integrated air filter box with thermostatically controlled fan. Optionally there is a air codition system available.

All operating units of the outer cusp, or in the external sub-distributors operating box. Standardized structure in two cabinets: Left cabinet regulation / Right control cabinet. In hydraulic-double-triple-quadruple systems accordingly increase the number of regulation cabinets.

By default, a control cabinet pedestal at a height of 200mm is provided. Variations in V2A / V4A (food industry) available.

MRL Roomless Controler Frequency Inverter Rope / Hydraulics - Casing KW 03
 

Coloured control cabinet KW03: 1850 x 450 x 260mm (H x W x D) with integrated frequency inverter for roomless elevators.

Control cabinet mounting plate and the contactor plate are mounted for protection against oscillation. Control cabinet door with interchangeable door on the ground attack and integrated air filter box with thermostatically controlled fan. The AW Rescue terminal is integrated in a yellow warning Casing.

Power unit with frequency inverter in the top of the control cabinet mounted. Frequency inverter with a nominal current to 62A amps are integrated in the controler cabinet. At nominal currents up to 152A, we use external arrangement. The shielded motor- and brakechopper wires are already connected (EMC Class B (N)).

In the bottom part of the cabinet is the information section arranged. The central controler DAVID-606 communicates serial (RS-485) with the car controler and the remote stations in the floors.

All shaft- and terminal boxes, and the communikation bus, landing- and car panels are pluggable. The lower port area has a height of 200mm and is equipped with punched holes for hose clamps.

Optional there is a cabinet pedestal is available.

MRL Roomless Controler Frequency Inverter Rope / Hydraulics - Casing KW 240
  Coloured control cabinet KW240: 2000 x 240 x 220mm (H x W x D) for roomless elevators (MRL) for mounting in / or beside the shaftdoor.

The weith of the mounting plate is 220mm. This construction is ideal for the replacement / redesign of KONE MONOSPACE or ThyssenKrupp MRLs.

The controler cabinet has got all components, esspecially the USV power unit with 800 VA (for brake opening and controler supply).

All elements for use and the AW Rescue terminal is integrated in a yellow warning Casing. All labels are designed as laser engraving.

At the bottom is located on the mounting plate of the cable space with a cable attachment plate for strain relief of incoming lines.

The cable entry can be done from the control cabinet bottom, or bottom of the cabinet back wall. The cable exit to an external drive is in the upper part of the enclosure.

Control cabinet door with interchangeable door on the ground attack. In the middle part of the cabinet is the information section arranged. The central controler DAVID-606 communicates serial (RS-485 & muli-protocol) with the car controler and the remote stations in the floors.

All shaft- and terminal boxes, and the communikation bus, landing- and car panels are pluggable.
MRL Roomless Controler Frequency Inverter Rope / Hydraulics - Casing KW 120
  V2A K240 control cabinet KW120: 2220 x 120 x 140mm (H x W x D) for roomless elevators (MRL) for mounting in / or beside the shaftdoor.

The weith of the mounting plate is 116mm. This construction is ideal for mounting in special Meiler & Sematic door frames, or for the replacement / redesign of Vestner MRLs.

All elements for use and the AW Rescue terminal is integrated in a yellow warning Casing. All labels are designed as laser engraving.

At the bottom is located on the mounting plate of the cable space with a cable attachment plate for strain relief of incoming lines. The cable entry can be done from the control cabinet bottom, or bottom of the cabinet back wall. The cable exit to an external frequency inverters is in the upper part of the enclosure.

The cabinet door is removable and is locked with a standard key cylinder.

In the middle part of the cabinet is the control panel with main switch, main- and secondary fuses, emergency control and other switches, respectively. The communication is done to the central computer DAVID-606 in the shaft, the FKR on the car and the well-floor remote stations by multi-protocol serial-bus system.

All shaft- and terminal boxes, and the communikation bus, landing- and car panels are pluggable.
Fire resistant Control Casing KW 360F
  Fire resistant control cabinet KW 360F: 1600 x 360 x 180mm (H x W x D), for machine room less elevators (MRL) for installation in escape and rescue routes with a fire resistance of at least 30 minutes at a fire load from inside.

All elements for use and the AW Rescue terminal is integrated in a yellow warning Casing. All labels are designed as laser engraving.

In the lower part of the cabinet are the terminals. In the middle part of the cabinet is the central unit DAVID-606/613, which communicates with the FKR on the car and the shaft floor computers via serial multiprotocol bus system.

Above that is the control panel with main switch, main and secondary fuses, emergency control and other switches, arranged.

General technical approval number Z-86.1-69 DIBt.